Important

This function is considered experimental and under active development and should not be used in production.

The function must be enabled using the feature flag ArrayFunctions. See Enabling & Disabling Feature Flags.

Determines the set union of array values over input events.

Used to compute the values that occur in any of the events supplied to this function. The output order of the values is not defined. If no arrays are found, the output is empty.

ParameterTypeRequiredDefault ValueDescription
array[a]stringrequired  The prefix of the array in LogScale, for example, for events with fields incidents[0], incidents[1], ... this would be incidents.
asstringoptional[b]_union The name of the output array.

[a] The parameter name array can be omitted.

[b] Optional parameters use their default value unless explicitly set.

Hide omitted argument names for this function

Show omitted argument names for this function

array:union() Examples

Deduplicate Compound Field Data

Query
logscale
splitString(field=userAgent,by=" ",as=agents)
  
|array:filter(array="agents[]", function={bname=/\//}, var="bname")
     
|array:union(array=agents,as=browsers)
|transpose()
|drop(column)
|groupBy(row[1])
Introduction

Deduplicating fields of information where there are multiple occurrences of a value in a single field, maybe separated by a single character can be achieved in a variety of ways. This solution makes use of array:union(), transpose() and groupBy() to collate and aggregate the information into the final list of values.

For example, when examining the humio and looking for the browsers or user agents that have used your instance, the UserAgent data will contain the browser and toolkits used to support them, for example:

syslog
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/116.0.0.0 Safari/537.36

The actual names are the Name/Version pairs showing compatibility with different browser standards. Resolving this into a simplified list requires splitting up the list, simplifying (to remove duplicates), filtering, and then summarizing the final list.

The process we need to follow is first extract the information into an array of values that we can then simplify and aggregate. It's possible the information in your raw data is already stored in an array of information that needs to be summarised.

Step-by-Step
  1. Starting with the source repository events.

  2. logscale
    splitString(field=userAgent,by=" ",as=agents)

    Splits up the userAgent field using a call to splitString() and places the output into the array field agents

    This will create individual array entries into the agents array for each event:

    agents[0]="Mozilla/5.0"
    agents[1]="(Macintosh;"
    agents[2]="Intel"
    agents[3]="Mac"
    agents[4]="OS"
    agents[5]="X"
    agents[6]="10_15_7)"
    agents[7]="AppleWebKit/537.36"
    agents[8]="(KHTML,"
    agents[9]="like"
    agents[10]="Gecko)"
    agents[11]="Chrome/116.0.0.0"
    agents[12]="Safari/537.36"
  3. logscale
    |array:filter(array="agents[]", function={bname=/\//}, var="bname")

  4. logscale
    |array:union(array=agents,as=browsers)

    Using array:union() we aggregate the list of user agents across all the events to create a list of unique entries. This will eliminate duplicates where the value of the user agent is the same value.

  5. logscale
    |transpose()

    Using the transpose() function, we transpose the rows and columns for the list of matching field names and values, turning:

    browsers[0]browsers[1]browsers[2]
    Gecko/20100101Safari/537.36AppleWebKit/605.1.15

    into:

    columnrow[1]
    browsers[0]Gecko/20100101
    browsers[1]Safari/537.36
    browsers[2]AppleWebKit/605.1.15
  6. logscale
    |drop(column)

    We do not need the column information, just the unique list of browsers in the row[1] column, so we drop the field from the event list.

  7. logscale
    |groupBy(row[1])

    Now we can aggregate the list, by the remaining field row[1] to provide the unique list of potential values. This is not a count of the times each has occurred, but a unique list of all the different possible values. The resulting list looks like this:

  8. Event Result set.

Summary and Results

The resulting output from the query is a summarized list of the unique possible values from the original source fields, even though the source information was originally contained within a single field in the source events.

row[1]_count
AppleWebKit/537.361
AppleWebKit/605.1.151
CFNetwork/1410.0.31
Chrome/116.0.0.01
Darwin/22.6.01
Firefox/116.01
Gecko/201001011
Mobile/15E1481
Mozilla/5.01
Safari/18615.3.12.11.21
Safari/537.361
Safari/604.11
Safari/605.1.151
Version/16.41
Version/16.61

Deduplicate Compound Field Data With array:union() and split()

Query
logscale
splitString(field=userAgent,by=" ",as=agents)
|array:filter(array="agents[]", function={bname=/\//}, var="bname")
|array:union(array=agents,as=browsers)
split(browsers)
Introduction

Deduplicating fields of information where there are multiple occurences of a value in a single field, maybe separated by a single character can be achieved in a variety of ways. This solution uses array:union() and split create a unique array and then split the content out to a unique list.

For example, when examining the humio and looking for the browsers or user agents that have used your instance, the UserAgent data will contain the browser and toolkits used to support them, for example:

Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/116.0.0.0 Safari/537.36

The actual names are the Name/Version pairs showing compatibility with different browser standards. Resolving this into a simplified list requires splitting up the list, simplifying (to remove duplicates), filtering, and then summarizing the final list.

Step-by-Step
  1. Starting with the source repository events.

  2. logscale
    splitString(field=userAgent,by=" ",as=agents)

    First we split up the userAgent field using a call to splitString() and place the output into the array field agents

    This will create individual array entries into the agents array for each event:

    agents[0]="Mozilla/5.0"
    agents[1]="(Macintosh;"
    agents[2]="Intel"
    agents[3]="Mac"
    agents[4]="OS"
    agents[5]="X"
    agents[6]="10_15_7)"
    agents[7]="AppleWebKit/537.36"
    agents[8]="(KHTML,"
    agents[9]="like"
    agents[10]="Gecko)"
    agents[11]="Chrome/116.0.0.0"
    agents[12]="Safari/537.36"
  3. logscale
    |array:filter(array="agents[]", function={bname=/\//}, var="bname")

  4. logscale
    |array:union(array=agents,as=browsers)

    Using array:union() we aggregate the list of user agents across all the events to create a list of unique entries. This will eliminate duplicates where the value of the user agent is the same value.

    The event data now looks like this:

    browsers[0]browsers[1]browsers[2]
    Gecko/20100101Safari/537.36AppleWebKit/605.1.15

    An array of the individual values.

  5. logscale
    split(browsers)

    Using the split() will split the array into individual events, turning:

    browsers[0]browsers[1]browsers[2]
    Gecko/20100101Safari/537.36AppleWebKit/605.1.15

    into:

    _indexrow[1]
    0Gecko/20100101
    1Safari/537.36
    2AppleWebKit/605.1.15
  6. Event Result set.

Summary and Results

The resulting output from the query is a list of events with each event containing a matching _index and browser. This can be useful if you want to perform further processing on a list of events rather than an array of values.

Find Union of Two Arrays

Find union of two flat arrays using the array:union() function

Query
logscale
array:union(mailto, as=unique_mails)
Introduction

Arrays are handy when you want to work with multiple values of the same data type. The array:union() function is used to filter two arrays for a set of distinct elements from both arrays. One important feature of UNION is, that it removes duplicate rows from the combined data meaning if there are repetitions, then only one element occurrence should be in the union.

Example incoming data might look like this:

mailto[0]mailto[1]
foo@example.combar@example.com
bar@example.com 
Step-by-Step
  1. Starting with the source repository events.

  2. logscale
    array:union(mailto, as=unique_mails)

    Searches in the mailto array across multiple events and returns the union of element values in a new array, where the unique emails will appear only once. In this case creating a unique list of email addresses in a single array.

  3. Event Result set.

Summary and Results

The query is used to search for and eliminate duplicates of e-mail addresses in arrays/combined datasets.

Sample output from the incoming example data:

unique_mails[0]unique_mails[1]
bar@example.comfoo@example.com